/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * $Id: vacuum-calibration.1007,v 1.1 2002/07/24 14:36:18 dripley Exp $ *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * RCS Log: * * $Log: vacuum-calibration.1007,v $ * Revision 1.1 2002/07/24 14:36:18 dripley * Initial revision * *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/ */ Vacuum Calibration done 07/24/02 -dkr */ Calibration vacuum-apex-1007 { // counts Vac("Hg) // comments 003 -29.0 007 -28.0 016 -26.0 025 -24.0 034 -22.0 042 -20.0 051 -18.0 059 -16.0 068 -14.0 076 -12.0 085 -9.9 093 -8.0 102 -6.0 110 -4.0 119 -2.0 127 0.0 143 4.1 160 8.1 177 12.2 193 16.3 210 20.4 } /* $ SwiftWare Polynomial Projector [SwiftWare] $ $Revision: 1.1 $ $Date: 2002/07/24 14:36:18 $ $ $ cmd line: fitpoly . $ $ Polynomial form: f(x) = (A0 + x(A1 + x(A2 + x(A3 + ... +x(An))))) $ Polynomial order = 1 $ Number of data points used in fit = 21 $ Standard deviation of misfit = 0.208856 $ Perturbation index, interval, & error = ( 2, 1, 0.208856 ) $ Confidence index, interval, & error = ( 0.999662, 4.3589, 0.910384 ) $ A0 = -30.0261676303772 +/- 0.314461615911523 $ A1 = 0.238289221177854 +/- 0.00347562838639052 $ $ # x y f(x) y - f(x) 1 3 -29 -29.3113 0.3113 1 7 -28 -28.3581 0.358143 1 16 -26 -26.2135 0.21354 1 25 -24 -24.0689 0.0689371 1 34 -22 -21.9243 -0.0756659 1 42 -20 -20.018 0.0180203 1 51 -18 -17.8734 -0.126583 1 59 -16 -15.9671 -0.0328964 1 68 -14 -13.8225 -0.177499 1 76 -12 -11.9162 -0.0838132 1 85 -9.9 -9.77158 -0.128416 1 93 -8 -7.86527 -0.13473 1 102 -6 -5.72067 -0.279333 1 110 -4 -3.81435 -0.185647 1 119 -2 -1.66975 -0.33025 1 127 0 0.236563 -0.236563 1 143 4.1 4.04919 0.050809 1 160 8.1 8.10011 -0.000107758 1 177 12.2 12.151 0.0489755 1 193 16.3 15.9637 0.336348 1 210 20.4 20.0146 0.385431 $ $ End of Stream */