Most recent profiles from float 5055:
Float 5055 suffers from a number of problems.
There is a firmware bug in the Sbe41cp that causes the flush-period at start-up of CP mode to run too long. The Sbe41cp documentation indicated that the initil flush-period configuration parameter was expressed in seconds. Actually, the flush-period is expressed in number of samples. In plain Sbe41cp's, the samples were measured at 1Hz so the number of samples and number of seconds are the same. However, the Sbe41cpIdo has a sample rate of 1.2seconds/sample (0.83Hz) and so the two differ.
Profile summary for float 5055
These plots were rendered using the GMT graphics utilities created by Paul Wessel & Walter Smith.