(Jan 18 2018 13:51:09,    8450 sec) SelfTest()           Executing self-test for ApfId 12712.
(Jan 18 2018 13:51:10,    8450 sec) PistonMoveAbsWTO()    016->020 017 018 019 020 [17sec, 15.0Volts, 0.161Amps, CPT:17sec]
(Jan 18 2018 13:51:27,    8467 sec) PistonMoveAbsWTO()    020->016 019 018 017 016 [17sec, 15.0Volts, 0.157Amps, CPT:34sec]
(Jan 18 2018 13:51:43,    8484 sec) SelfTest()           Passed: Timed piston movements from 16 to 20 counts and back.
(Jan 18 2018 13:51:44,    8484 sec) SelfTest()           Passed: internal pressure [89, -4.2"Hg] less than threshold [96, -2.1"Hg].
(Jan 18 2018 13:51:45,    8485 sec) SelfTest()           Passed: FLASH file system has been initialized.
(Jan 18 2018 13:51:48,    8488 sec) SelfTest()           Passed: FLASH file system has been reformatted.
(Jan 18 2018 13:51:50,    8490 sec) SelfTest()           Passed: Response received from SBE41cp.
(Jan 18 2018 13:51:57,    8498 sec) SelfTest()           Passed: Sbe41cp SerNo: 9755
(Jan 18 2018 13:52:07,    8507 sec) SelfTest()           Passed: SBE41cp (SerNo 9755) FwRev accepted: [7.2.5]
(Jan 18 2018 13:52:07,    8507 sec) SelfTest()           Passed: SBE41cp (SerNo 9755) firmware build-date accepted: [Oct 14 2015 20:03:56]
(Jan 18 2018 13:52:07,    8508 sec) SelfTest()           Passed: SBE41cp (SerNo 9755) firmware variant accepted: [CP UW]
(Jan 18 2018 13:52:19,    8519 sec) Sbe41cpConfig()      Configuration successful.
(Jan 18 2018 13:52:31,    8532 sec) Sbe41cpEnablePts()   PTS output enabled during CP mode.
(Jan 18 2018 13:52:41,    8542 sec) Sbe41cpTsWait()      Configuration successful.
(Jan 18 2018 13:52:46,    8546 sec) SelfTest()           Passed: SBE41cp configuration was successful.
(Jan 18 2018 13:52:49,    8550 sec) SelfTest()           Passed: LBT model: IRIDIUM 9600 Family SBD Transceiver
(Jan 18 2018 13:52:50,    8551 sec) SelfTest()           Passed: LBT firmware revision: TA15002
(Jan 18 2018 13:52:51,    8552 sec) SelfTest()           Passed: LBT's destination gateway: non-EMSS
(Jan 18 2018 13:52:52,    8552 sec) IrModemConfigure()   Modem configured for fixed (19200) baud rate.
(Jan 18 2018 13:52:52,    8553 sec) IrModemConfigure()   Configuration saved to modem's NVRAM.
(Jan 18 2018 13:52:53,    8553 sec) IrModemConfigure()   Modem configuration successful.
(Jan 18 2018 13:52:53,    8553 sec) SelfTest()           Passed: LBT configuration was successful.
(Jan 18 2018 13:52:54,    8554 sec) SelfTest()           Passed: LBT IMEI: 300234064870720
(Jan 18 2018 13:52:55,    8555 sec) ConfigGarmin15()     Garmin GPS15 configuration initiated.
(Jan 18 2018 13:53:05,    8566 sec) ConfigGarmin15()     Garmin GPS15 successfully configured.
(Jan 18 2018 13:53:10,    8571 sec) SelfTest()           Passed: Optode FwRev accepted: [4.4.8]
(Jan 18 2018 13:53:14,    8575 sec) SelfTest()           Passed: Optode SerNo: 2836
(Jan 18 2018 13:53:28,    8589 sec) OptodeConfig()       Configuration successful.
(Jan 18 2018 13:53:29,    8589 sec) SelfTest()           Passed: Optode configuration was successful.
(Jan 18 2018 13:53:30,    8591 sec) PActivateInit()      Self-test passed - initiating six 4-second squawks.
(Jan 18 2018 13:54:23,    8644 sec) PActivateInit()      Pressure activation mode initiated. [itime=8591]
(Jan 18 2018 13:54:23,       0 sec) PistonMoveAbsWTO()    016->016 [0sec, 0.0Volts, 0.000Amps, CPT:34sec]
(Jan 18 2018 13:55:16,      52 sec) Apf9Init()           Asynchronous wake-up detected (ie., wake-up not initiated by alarm signal). [0xe0]
(Jan 27 2018 11:54:36,       0 sec) PreludeInit()        Mission restarted. [pid=0, itime=770412]
(Jan 27 2018 11:54:44,       8 sec) PreludeBypass()      Initiating first profile cycle.
<EOT>