(Jan 18 2018 13:25:16,    3238 sec) SelfTest()           Executing self-test for ApfId 12652.
(Jan 18 2018 13:25:16,    3238 sec) PistonMoveAbsWTO()    016->020 017 018 019 020 [17sec, 15.0Volts, 0.141Amps, CPT:17sec]
(Jan 18 2018 13:25:33,    3255 sec) PistonMoveAbsWTO()    020->016 019 018 017 016 [17sec, 14.9Volts, 0.149Amps, CPT:34sec]
(Jan 18 2018 13:25:50,    3272 sec) SelfTest()           Passed: Timed piston movements from 16 to 20 counts and back.
(Jan 18 2018 13:25:51,    3273 sec) SelfTest()           Passed: internal pressure [90, -3.9"Hg] less than threshold [96, -2.1"Hg].
(Jan 18 2018 13:25:52,    3273 sec) SelfTest()           Passed: FLASH file system has been initialized.
(Jan 18 2018 13:25:55,    3277 sec) SelfTest()           Passed: FLASH file system has been reformatted.
(Jan 18 2018 13:25:57,    3279 sec) SelfTest()           Passed: Response received from SBE41cp.
(Jan 18 2018 13:26:04,    3286 sec) SelfTest()           Passed: Sbe41cp SerNo: 9763
(Jan 18 2018 13:26:14,    3295 sec) SelfTest()           Passed: SBE41cp (SerNo 9763) FwRev accepted: [7.2.5]
(Jan 18 2018 13:26:14,    3296 sec) SelfTest()           Passed: SBE41cp (SerNo 9763) firmware build-date accepted: [Oct 14 2015 20:03:56]
(Jan 18 2018 13:26:14,    3296 sec) SelfTest()           Passed: SBE41cp (SerNo 9763) firmware variant accepted: [CP UW]
(Jan 18 2018 13:26:26,    3307 sec) Sbe41cpConfig()      Configuration successful.
(Jan 18 2018 13:26:38,    3320 sec) Sbe41cpEnablePts()   PTS output enabled during CP mode.
(Jan 18 2018 13:26:48,    3330 sec) Sbe41cpTsWait()      Configuration successful.
(Jan 18 2018 13:26:53,    3334 sec) SelfTest()           Passed: SBE41cp configuration was successful.
(Jan 18 2018 13:26:56,    3338 sec) SelfTest()           Passed: LBT model: IRIDIUM 9600 Family SBD Transceiver
(Jan 18 2018 13:26:57,    3339 sec) SelfTest()           Passed: LBT firmware revision: TA15002
(Jan 18 2018 13:26:58,    3340 sec) SelfTest()           Passed: LBT's destination gateway: non-EMSS
(Jan 18 2018 13:26:59,    3341 sec) IrModemConfigure()   Modem configured for fixed (19200) baud rate.
(Jan 18 2018 13:26:59,    3341 sec) IrModemConfigure()   Configuration saved to modem's NVRAM.
(Jan 18 2018 13:27:00,    3341 sec) IrModemConfigure()   Modem configuration successful.
(Jan 18 2018 13:27:00,    3342 sec) SelfTest()           Passed: LBT configuration was successful.
(Jan 18 2018 13:27:01,    3343 sec) SelfTest()           Passed: LBT IMEI: 300234064876590
(Jan 18 2018 13:27:02,    3344 sec) ConfigGarmin15()     Garmin GPS15 configuration initiated.
(Jan 18 2018 13:27:13,    3354 sec) ConfigGarmin15()     Garmin GPS15 successfully configured.
(Jan 18 2018 13:27:18,    3359 sec) SelfTest()           Passed: Optode FwRev accepted: [4.4.8]
(Jan 18 2018 13:27:21,    3363 sec) SelfTest()           Passed: Optode SerNo: 2834
(Jan 18 2018 13:27:35,    3377 sec) OptodeConfig()       Configuration successful.
(Jan 18 2018 13:27:35,    3377 sec) SelfTest()           Passed: Optode configuration was successful.
(Jan 18 2018 13:27:37,    3379 sec) PActivateInit()      Self-test passed - initiating six 4-second squawks.
(Jan 18 2018 13:28:30,    3431 sec) PActivateInit()      Pressure activation mode initiated. [itime=3379]
(Jan 18 2018 13:28:30,       0 sec) PistonMoveAbsWTO()    016->016 [0sec, 0.0Volts, 0.000Amps, CPT:34sec]
(Jan 18 2018 13:29:21,      51 sec) Apf9Init()           Asynchronous wake-up detected (ie., wake-up not initiated by alarm signal). [0xe0]
(Jan 26 2018 23:28:42,       0 sec) PreludeInit()        Mission restarted. [pid=0, itime=727212]
(Jan 26 2018 23:28:50,       8 sec) PreludeBypass()      Initiating first profile cycle.
<EOT>