(Jan 18 2018 13:34:04,    1742 sec) SelfTest()           Executing self-test for ApfId 12631.
(Jan 18 2018 13:34:05,    1742 sec) PistonMoveAbsWTO()    016->020 017 018 019 020 [15sec, 14.9Volts, 0.177Amps, CPT:15sec]
(Jan 18 2018 13:34:20,    1757 sec) PistonMoveAbsWTO()    020->016 019 018 017 016 [15sec, 14.9Volts, 0.161Amps, CPT:30sec]
(Jan 18 2018 13:34:35,    1773 sec) SelfTest()           Passed: Timed piston movements from 16 to 20 counts and back.
(Jan 18 2018 13:34:36,    1773 sec) SelfTest()           Passed: internal pressure [90, -3.9"Hg] less than threshold [97, -1.9"Hg].
(Jan 18 2018 13:34:36,    1774 sec) SelfTest()           Passed: FLASH file system has been initialized.
(Jan 18 2018 13:34:40,    1777 sec) SelfTest()           Passed: FLASH file system has been reformatted.
(Jan 18 2018 13:34:42,    1779 sec) SelfTest()           Passed: Response received from SBE41cp.
(Jan 18 2018 13:34:49,    1786 sec) SelfTest()           Passed: Sbe41cp SerNo: 9758
(Jan 18 2018 13:34:58,    1796 sec) SelfTest()           Passed: SBE41cp (SerNo 9758) FwRev accepted: [7.2.5]
(Jan 18 2018 13:34:59,    1796 sec) SelfTest()           Passed: SBE41cp (SerNo 9758) firmware build-date accepted: [Oct 14 2015 20:03:56]
(Jan 18 2018 13:34:59,    1797 sec) SelfTest()           Passed: SBE41cp (SerNo 9758) firmware variant accepted: [CP UW]
(Jan 18 2018 13:35:10,    1808 sec) Sbe41cpConfig()      Configuration successful.
(Jan 18 2018 13:35:23,    1820 sec) Sbe41cpEnablePts()   PTS output enabled during CP mode.
(Jan 18 2018 13:35:33,    1830 sec) Sbe41cpTsWait()      Configuration successful.
(Jan 18 2018 13:35:37,    1835 sec) SelfTest()           Passed: SBE41cp configuration was successful.
(Jan 18 2018 13:35:41,    1838 sec) SelfTest()           Passed: LBT model: IRIDIUM 9600 Family SBD Transceiver
(Jan 18 2018 13:35:42,    1840 sec) SelfTest()           Passed: LBT firmware revision: TA15002
(Jan 18 2018 13:35:43,    1841 sec) SelfTest()           Passed: LBT's destination gateway: non-EMSS
(Jan 18 2018 13:35:44,    1841 sec) IrModemConfigure()   Modem configured for fixed (19200) baud rate.
(Jan 18 2018 13:35:44,    1841 sec) IrModemConfigure()   Configuration saved to modem's NVRAM.
(Jan 18 2018 13:35:44,    1842 sec) IrModemConfigure()   Modem configuration successful.
(Jan 18 2018 13:35:45,    1842 sec) SelfTest()           Passed: LBT configuration was successful.
(Jan 18 2018 13:35:45,    1843 sec) SelfTest()           Passed: LBT IMEI: 300234064875590
(Jan 18 2018 13:35:47,    1844 sec) ConfigGarmin15()     Garmin GPS15 configuration initiated.
(Jan 18 2018 13:35:57,    1855 sec) ConfigGarmin15()     Garmin GPS15 successfully configured.
(Jan 18 2018 13:36:02,    1860 sec) SelfTest()           Passed: Optode FwRev accepted: [4.4.8]
(Jan 18 2018 13:36:06,    1863 sec) SelfTest()           Passed: Optode SerNo: 2835
(Jan 18 2018 13:36:20,    1877 sec) OptodeConfig()       Configuration successful.
(Jan 18 2018 13:36:20,    1877 sec) SelfTest()           Passed: Optode configuration was successful.
(Jan 18 2018 13:36:22,    1879 sec) PActivateInit()      Self-test passed - initiating six 4-second squawks.
(Jan 18 2018 13:37:14,    1932 sec) PActivateInit()      Pressure activation mode initiated. [itime=1879]
(Jan 18 2018 13:37:15,       0 sec) PistonMoveAbsWTO()    016->016 [0sec, 0.0Volts, 0.000Amps, CPT:30sec]
(Jan 18 2018 13:41:30,     255 sec) Apf9Init()           Asynchronous wake-up detected (ie., wake-up not initiated by alarm signal). [0xe0]
(Jan 26 2018 11:37:27,       0 sec) PreludeInit()        Mission restarted. [pid=0, itime=684012]
(Jan 26 2018 11:37:35,       8 sec) PreludeBypass()      Initiating first profile cycle.
<EOT>
<EOT>