(Jan 18 2018 13:42:03,   10401 sec) SelfTest()           Executing self-test for ApfId 12472.
(Jan 18 2018 13:42:04,   10402 sec) PistonMoveAbsWTO()    016->020 017 018 019 020 [17sec, 15.0Volts, 0.157Amps, CPT:17sec]
(Jan 18 2018 13:42:21,   10419 sec) PistonMoveAbsWTO()    020->016 019 018 017 016 [16sec, 15.0Volts, 0.149Amps, CPT:33sec]
(Jan 18 2018 13:42:37,   10435 sec) SelfTest()           Passed: Timed piston movements from 16 to 20 counts and back.
(Jan 18 2018 13:42:38,   10436 sec) SelfTest()           Passed: internal pressure [89, -4.2"Hg] less than threshold [96, -2.1"Hg].
(Jan 18 2018 13:42:39,   10437 sec) SelfTest()           Passed: FLASH file system has been initialized.
(Jan 18 2018 13:42:42,   10440 sec) SelfTest()           Passed: FLASH file system has been reformatted.
(Jan 18 2018 13:42:44,   10442 sec) SelfTest()           Passed: Response received from SBE41cp.
(Jan 18 2018 13:42:51,   10449 sec) SelfTest()           Passed: Sbe41cp SerNo: 9757
(Jan 18 2018 13:43:00,   10458 sec) SelfTest()           Passed: SBE41cp (SerNo 9757) FwRev accepted: [7.2.5]
(Jan 18 2018 13:43:01,   10459 sec) SelfTest()           Passed: SBE41cp (SerNo 9757) firmware build-date accepted: [Oct 14 2015 20:03:56]
(Jan 18 2018 13:43:01,   10459 sec) SelfTest()           Passed: SBE41cp (SerNo 9757) firmware variant accepted: [CP UW]
(Jan 18 2018 13:43:13,   10470 sec) Sbe41cpConfig()      Configuration successful.
(Jan 18 2018 13:43:25,   10483 sec) Sbe41cpEnablePts()   PTS output enabled during CP mode.
(Jan 18 2018 13:43:35,   10493 sec) Sbe41cpTsWait()      Configuration successful.
(Jan 18 2018 13:43:40,   10497 sec) SelfTest()           Passed: SBE41cp configuration was successful.
(Jan 18 2018 13:43:43,   10501 sec) SelfTest()           Passed: LBT model: IRIDIUM 9600 Family SBD Transceiver
(Jan 18 2018 13:43:44,   10502 sec) SelfTest()           Passed: LBT firmware revision: TA15002
(Jan 18 2018 13:43:45,   10503 sec) SelfTest()           Passed: LBT's destination gateway: non-EMSS
(Jan 18 2018 13:43:46,   10504 sec) IrModemConfigure()   Modem configured for fixed (19200) baud rate.
(Jan 18 2018 13:43:46,   10504 sec) IrModemConfigure()   Configuration saved to modem's NVRAM.
(Jan 18 2018 13:43:46,   10504 sec) IrModemConfigure()   Modem configuration successful.
(Jan 18 2018 13:43:47,   10505 sec) SelfTest()           Passed: LBT configuration was successful.
(Jan 18 2018 13:43:48,   10506 sec) SelfTest()           Passed: LBT IMEI: 300234064878650
(Jan 18 2018 13:43:49,   10507 sec) ConfigGarmin15()     Garmin GPS15 configuration initiated.
(Jan 18 2018 13:43:59,   10517 sec) ConfigGarmin15()     Garmin GPS15 successfully configured.
(Jan 18 2018 13:44:04,   10522 sec) SelfTest()           Passed: Optode FwRev accepted: [4.4.8]
(Jan 18 2018 13:44:08,   10526 sec) SelfTest()           Passed: Optode SerNo: 2832
(Jan 18 2018 13:44:22,   10540 sec) OptodeConfig()       Configuration successful.
(Jan 18 2018 13:44:22,   10540 sec) SelfTest()           Passed: Optode configuration was successful.
(Jan 18 2018 13:44:24,   10542 sec) PActivateInit()      Self-test passed - initiating six 4-second squawks.
(Jan 18 2018 13:45:16,   10594 sec) PActivateInit()      Pressure activation mode initiated. [itime=10542]
(Jan 18 2018 13:45:17,       1 sec) PistonMoveAbsWTO()    016->016 [0sec, 0.0Volts, 0.000Amps, CPT:33sec]
(Jan 18 2018 13:50:42,     326 sec) Apf9Init()           Asynchronous wake-up detected (ie., wake-up not initiated by alarm signal). [0xe0]
(Jan 27 2018 03:45:28,       0 sec) PreludeInit()        Mission restarted. [pid=0, itime=741612]
(Jan 27 2018 03:45:36,       8 sec) PreludeBypass()      Initiating first profile cycle.
<EOT>